The part number 2090-CSBM1DF-18AA09 is a Kinetix single cable designed for use with the K5500 series. It is a 9-meter long cable with a non-flexible TPE orange jacket, featuring 18 AWG conductors and a hybrid design that supports both power and feedback signals. The cable is designed for use in motion control applications, particularly with servo motors and actuators.
Technical Specifications
- Construction: The cable has an outer diameter of approximately 15 mm, with a core color of green/yellow. It is 9 meters long and features a drive-end connector type that is optimized for the Kinetix 5500 series.
- Electrical: The cable has an AWG size of 18 and supports a nominal voltage of 1000 V. It is designed for single motor power only, with four power and two feedback (digital communication) conductors.
- Mechanical: The cable has a nominal cross-section conductor of 0.82 mm² and is designed to be used in continuous flex applications. It features a low capacitance design to maximize system power density and has a tinned copper braid with aluminum/polymer insulation.
- Environmental: The cable is designed to operate in environments with a maximum conductor temperature of 105°C.
User Manuals and Documentation
The product documentation includes technical data sheets and installation instructions. The technical data sheet provides detailed specifications and features of the cable, while the installation instructions guide users through the process of installing the cable in their systems.
Troubleshooting and Programming
Troubleshooting and programming for this cable are typically handled through the Kinetix software and configuration tools provided by Rockwell Automation. These tools allow users to configure and monitor the cable's performance in real-time, as well as troubleshoot any issues that may arise during operation.
Installation
The installation of this cable typically involves connecting it to the K5500 series motor and the control system. The cable should be secured in place using cable ties or other suitable fasteners to prevent damage or disconnection during operation.
Alarm and Error Codes
Alarm and error codes for this cable are typically handled through the Kinetix software and control system. These codes are used to indicate any issues with the cable's performance or connectivity, and can be used by users to troubleshoot and resolve problems.