The Rockwell Automation 2090-CSBM1DF-14AF30 is a single motor power cable designed for use with the Kinetix 5500 servo drives. It features a continuous-flexible cable with a 14 AWG wire, TPE jacket, and a single speedTec DIN connector at the motor end. The cable has a length of 30 meters and is designed for use in applications where high power density and precise control are required.
Technical Specifications
-
Construction:
- Outer diameter: approximately 17 mm
- Core color: White
- Cable length: 30 meters
- Drive-end connector type: Drive-end, without connector kit, flying-lead (optimized for Kinetix 5500)
- Number of cores: 8
- With protective conductor: Yes
- Core identification: Color
- Color outer sheath: Orange
- Conductor material: Copper
- Conductor surface: Tinned
- Color cable code: RAL2003
- Core color: White/blue
-
Electrical:
- AWG size: 14
- Nominal voltage U: 1000 V
- Cable type: Single motor power with brake wires
- Cable description: Power with brake wires: 1000V hybrid cable with four power, two feedback (digital communication), and two brake conductors
-
Mechanical:
- Nominal cross section conductor: 2.08 mm²
- Nominal cross section conductor (AWG): 4.1 kcmil
- Cable style: Continuous-flexible
- Weight, approx: Continuous-flex, power with brake wire: 0.289 kg/m
- Twisted cores: No
- Accessory component: Cable
- Continuous bend radius: Continuous flex: 10 times the cable diameter
- Features: Low capacitance design to maximize system power density, speedtec connection system, encoder communication data pair with noise rejection, TPE jacket with mechanical and chemical properties, cable features overall tinned copper braid with aluminum/polyester insulation
-
Environmental:
- Max. conductor temperature: 105 °C
Documentation
- Technical Data: KNX-TD004
Troubleshooting and Programming
The troubleshooting and programming of the 2090-CSBM1DF-14AF30 cable are not specific to this product, as it is a standard cable designed for use with the Kinetix 5500 servo drives. Troubleshooting and programming for the Kinetix 5500 drives are typically handled through the drive's user interface or through software applications provided by Rockwell Automation.
Installation
The installation of the 2090-CSBM1DF-14AF30 cable is straightforward and involves connecting the cable to the Kinetix 5500 servo drive and the motor. The cable should be securely fastened to the motor and drive to prevent damage or disconnection during operation. It is recommended to follow the manufacturer's guidelines for installation and to ensure that the cable is properly secured and protected from environmental factors that could affect its performance or lifespan.