The Allen-Bradley 2090-CSBM1DF-14AA08 is a product from Rockwell Automation, specifically designed for use with Kinetix 5500 servo drives. It is a single-speed motor-end connector type with a DIN connector, featuring a wire gauge size of 14 AWG and a standard, non-flexible cable style. This product is part of the 2090-Series Single Motor Cables, which are designed with flying-leads and lead preparation tailored for use with Kinetix 5500 servo drives, eliminating the need for on-site lead preparation.
The technical specifications of the product include dimensions such as length, diameter, and weight, which vary depending on the specific product variant. For example, the 2090-CSBM1DF-14AA08 has a length of 105 mm (4.1 inches), a diameter of 119 mm (4.7 inches), and a weight of 150 mm (5.9 inches).
The product does not appear to have any specific alarm or error codes associated with it. However, it is designed to be used with Kinetix 5500 servo drives, which are known for their advanced motor control capabilities and robust error handling. If any issues arise during operation, troubleshooting would likely involve checking the motor and drive connections, as well as the servo drive's error logs.
User manuals for the product are not readily available online, but they can likely be obtained through Rockwell Automation's customer support or through authorized distributors. The manuals would provide detailed information on installation, operation, and maintenance of the product.
Troubleshooting for the product would involve identifying the source of the issue, which could be related to the motor, the drive, or the connections between them. This would involve checking the motor's power and feedback signals, as well as the drive's error logs and configuration settings. If the issue persists, it may be necessary to consult the user manual or contact Rockwell Automation's technical support.
The product can be programmed using Rockwell Automation's software tools, such as the Kinetix 5500 servo drive's built-in programming capabilities or third-party software that interfaces with the drive. The programming process would involve setting up the motor and drive parameters, such as motor speed and acceleration, as well as configuring the drive's error handling and alarm settings.
Installation of the product typically involves connecting the motor-end connector to the motor and the other end to the Kinetix 5500 servo drive. The installation process should be performed in accordance with the manufacturer's instructions and any relevant safety guidelines. It is recommended that a qualified technician or engineer perform the installation to ensure proper operation and minimize the risk of damage or injury.