The Rockwell Automation 2090-CSBM1DE-18AA50 is a single motor cable designed for use with Kinetix 5700 servo drive systems. It is a standard, non-flexible cable with a wire size of 18 AWG (0.248 mm or 0.167 inches) and a length of 50 meters (164 feet). This cable is used for power and feedback connections in motor applications, including brake wires. It is designed to meet the requirements of motor brake circuits on Kinetix 5700 servo drive systems with cable lengths that exceed the standard 2090-CSBM1DE (series B) cables.
Technical Specifications
- Cable Type: Standard, non-flexible
- Wire Size: 18 AWG (0.248 mm or 0.167 inches)
- Length: 50 meters (164 feet)
- Conductors: Four power, two feedback (digital communication), and two brake conductors
- Material: PVC (polyvinyl chloride)
- Color: Orange (DESINA, RAL 2003)
- Voltage Rating: 1000V
- Continuous Bend Radius: Not specified
- Expected Flex Cycles at Rated Radius: Not specified
Alarm/Error Codes
No specific alarm or error codes are mentioned in the provided documentation for this product. These codes are typically used to indicate issues with the cable or its connections, and are usually specific to the system or device it is used in. For detailed information on alarm and error codes for this product, it is recommended to consult the user manual or technical documentation specific to the system or device it is used with.
User Manuals
The user manual for the Rockwell Automation 2090-CSBM1DE-18AA50 is not provided in our research. However, it is likely that the manual is available from Rockwell Automation or other authorized sources. The manual would provide detailed information on the cable's installation, configuration, and troubleshooting procedures.
Troubleshooting
Troubleshooting procedures for the Rockwell Automation 2090-CSBM1DE-18AA50 would depend on the specific issues encountered. Common issues with cables include damage to the insulation or conductors, improper connections, or incorrect installation. For detailed troubleshooting procedures, it is recommended to consult the user manual or technical documentation specific to the system or device it is used with.
Programming
The Rockwell Automation 2090-CSBM1DE-18AA50 is a physical cable and does not require programming. It is designed to provide a physical connection between the motor and the servo drive system, allowing for the transfer of power and feedback signals.
Installation
The installation of the Rockwell Automation 2090-CSBM1DE-18AA50 involves connecting the cable to the motor and the servo drive system according to the manufacturer's instructions. The cable should be installed in a way that minimizes bending and stress on the conductors, and it should be secured to prevent damage or disconnection during operation. For detailed installation instructions, it is recommended to consult the user manual or technical documentation specific to the system or device it is used with.
Go to product