The Rockwell Automation 2090-CSBM1DE-14AF50 is a single motor cable designed for use with Kinetix 5700 servo drives. It is a continuous-flex cable with a TPE jacket and features a low capacitance design to maximize system power density. The cable has a single speedTec DIN connector at the drive-end and is designed for use with 14 AWG wire. It is available in a 50-meter length.
Technical Specifications
Construction
- Outer diameter: approximately 17 mm
- Core color: white
- Cable length: 20 meters
- Drive-end connector type: Drive-end, flying-leads with factory pre-installed connector kit (optimized for Kinetix 5700)
- Number of cores: 8
- With protective conductor: Yes
- Core identification: Color
- Color outer sheath: Orange
- Conductor material: Copper
- Conductor surface: Tinned
- Color cable code: RAL2003
- Core color: White/blue
- Motor-end connector type: Single speedTec DIN connector
Electrical
- AWG size: 14
- Nominal voltage U: 1000 V
- Cable type: Single motor power with brake wires
- Cable description: Power with brake wires: 1000V hybrid cable with four power, two feedback (digital communication), and two brake conductors
Mechanical
- Nominal cross section conductor: 2.08 mm²
- Nominal cross section conductor (AWG): 4.1 kcmil
- Cable style: Continuous-flexible
- Weight, approx: Continuous-flex, power with brake wire: 0.289 kg/m
- Twisted cores: No
- Accessory component: Cable
- Continuous bend radius: Continuous flex: 10 times the cable diameter
- Features: Low capacitance design to maximize system power density, speedtec connection system, encoder communication data pair with noise rejection, TPE jacket with mechanical and chemical properties, cable features overall tinned copper braid with aluminum/polymer
Environmental
- Max. conductor temperature: 105 °C
Documentation
Technical Data: KNX-TD004
Troubleshooting
The troubleshooting process for this cable is not explicitly detailed in the provided documentation. However, general troubleshooting procedures for similar cables can be found in the product literature and technical data sheets. These procedures typically involve checking for physical damage, ensuring proper connections, and verifying the cable's specifications against the system requirements.
Programming
The programming of this cable is not a specific function of the cable itself but rather of the drive system it is connected to. The programming of the Kinetix 5700 servo drive system involves setting parameters such as motor speed, acceleration, and braking, which are typically done through a programming software or interface provided by the drive system manufacturer.
Installation
The installation of this cable involves connecting it to the drive system and motor according to the manufacturer's instructions. This typically involves connecting the cable to the drive-end connector of the drive system and the motor-end connector of the motor. The cable should be routed in a way that minimizes stress and damage, and the connections should be secured properly to prevent disconnection during operation.
Go to product