The part number 2090-CSBM1DE-14AA11 is a single motor power cable with brake wires, designed for use with the Kinetix 5700 servo drive systems from Rockwell Automation. This cable is part of the 2090 series, which offers a range of motor cables with different specifications and lengths.
Technical Specifications
- Construction: The cable has an outer diameter of approximately 17 mm, with a white core color and a 20-meter cable length. It features a drive-end connector type optimized for Kinetix 5700, with a number of cores equal to 8, and includes a protective conductor. The core identification is by color, and the outer sheath color is orange.
- Electrical: The cable has an AWG size of 14, with a nominal voltage of 1000 volts. It is a 1000V hybrid cable with four power, two feedback (digital communication), and two brake conductors.
- Mechanical: The cable has a nominal cross-section conductor of 2.08 mm², which is equivalent to an AWG size of 4.1 kcmil. It is designed to be continuous-flexible, with a weight of approximately 0.289 kg per meter. The cable does not have twisted cores and features a low capacitance design to maximize system power density.
- Environmental: The maximum conductor temperature is 105°C.
Documentation
The product literature for this cable includes technical data, which can be found under the publication number KNX-TD004. This document provides detailed information about the cable's specifications, including its construction, electrical, mechanical, and environmental characteristics.
Installation and Troubleshooting
For installation and troubleshooting information, refer to the "2090-Series Single Motor Cables Installation Instructions" document, which is available under the publication number 2090-IN051E-EN-P. This document provides detailed instructions for installing and troubleshooting the cable, including information on cable length specifications and extension cable specifications.
Programming
The cable does not require programming as it is a physical component designed for connecting motors to drive systems. Programming would typically be done on the drive system itself, such as the Kinetix 5700 servo drive system, and would depend on the specific requirements of the application.
User Manual
The user manual for the Kinetix 5700 servo drive system, which includes information on the cable's usage and installation, is not directly available for this specific part number. However, the user manual for the Kinetix 5700 drive system can be found on the Rockwell Automation website, and it provides detailed information on the drive system's operation and configuration.
Alarm/Error Codes
The cable itself does not generate alarm or error codes. Any issues with the cable would typically be related to physical damage or improper installation, and would not be related to programming or system errors. The Kinetix 5700 drive system, which the cable connects to, may generate error codes or alarms depending on the specific application and configuration, but these would not be related to the cable itself.
Go to product