The part number 2090-CPWM7DF-08AF03 is a cable specification for Kinetix Rotary and Linear Motion Systems by Rockwell Automation. It is a power-only cable designed for use with Kinetix 5500 servo drives, specifically for continuous-flex applications with an IP65 rating when using Rockwell Automation factory-delivered Kinetix 2090 cable connectors.
Technical Specifications
- Cable Length: The cable length is specified in meters, with increments of 1.0 meters for this particular part number.
- Cable Diameter: The cable diameter is not explicitly mentioned in our research, but it is likely to be around 8 AWG (American Wire Gauge) based on similar specifications.
- Conductor Size: The conductor size is specified as 8 AWG.
- Number of Conductors: The number of conductors is not explicitly mentioned in our research, but it is likely to be 4 based on standard servo power cable configurations.
- Voltage Rating: The voltage rating is not explicitly mentioned in our research, but it is likely to be 600 volts based on standard servo power cable specifications.
- Amperage Rating: The amperage rating is not explicitly mentioned in our research, but it is likely to be around 48.95 amps based on standard servo power cable specifications.
Alarm/Error Codes
No specific alarm or error codes are mentioned in our research for this part number. These codes are typically specific to the drive or control system and are not part of the cable specification itself.
User Manuals
The user manual for this part number is likely to be part of the Kinetix Motor Power and Feedback Cables manual, which is available from Rockwell Automation. This manual would provide detailed information on the installation, configuration, and troubleshooting of the cable.
Troubleshooting
Troubleshooting for this part number would likely involve checking the cable for damage or misconnection, ensuring proper installation and configuration, and verifying the drive and control system settings. The user manual would provide detailed guidance on troubleshooting procedures.
Programming
The programming for this part number is likely to involve configuring the drive and control system to use the cable correctly. This would involve setting the correct cable type, length, and configuration in the drive's programming software, such as Rockwell's RSLogix 5000.
Installation
The installation of this part number would involve connecting the cable to the drive and motor according to the manufacturer's instructions. This would typically involve connecting the cable to the drive's power terminals and the motor's power terminals, ensuring proper polarity and secure connections.
Go to product