The Allen-Bradley 156-C1P85NCD is a single-phase solid-state contactor designed for use in industrial automation applications. It is capable of handling up to 85 amps of current and can operate within a voltage range of 600V AC. The contactor is designed with a DC control input, which can be supplied with a voltage between 5 and 32V DC.
Technical Specifications
- Output Type: PNP open collector
- Potential Free Normal State: Closed
- Maximum Current Rating (mA DC): 50
- Rated Voltage (EN61131-2: 2003): 24V DC
- Operating Temperature Range: -30°C to 70°C (-22°F to 158°F) for overtemperature protection, and -40°C to 80°C (-40°F to 176°F) for derating above storage temperature
- Storage Temperature: -40°C to 100°C (-40°F to 212°F)
- Vibration Resistance: 2G per axis (2…100 Hz) per IEC60068-2-6, EN50155, and EN61373
- Impact Resistance: 15/11 g/ms per EN50155
- Pollution Degree: 2 (non-conductive pollution with possibilities of condensation)
- Overvoltage Category: III (fixed installations)
- Isolation: Input to Output: 4000V rms; Input and Output to case: 4000V rms; Input to Fan/Alarm: 2500V rms
Alarm/Error Codes
The documentation provided does not specify any alarm or error codes for this product.
User Manuals
The user manual for the Allen-Bradley 156-C1P85NCD is available in the form of a technical data sheet, which provides detailed specifications and technical information about the product. The document can be accessed through the Rockwell Automation website or through other online sources.
Troubleshooting
Troubleshooting information for the Allen-Bradley 156-C1P85NCD is not explicitly provided in our research. However, troubleshooting guides and technical support resources are likely available through the manufacturer's website or through authorized service providers.
Programming
The Allen-Bradley 156-C1P85NCD is a solid-state contactor designed for use in industrial automation applications. It does not require programming in the classical sense, as it is a simple on/off switch. However, it can be integrated into larger control systems and programmed using various programming languages and software tools, depending on the specific application and system architecture.
Installation
The installation of the Allen-Bradley 156-C1P85NCD typically involves mounting the contactor in a suitable location, connecting the power and control inputs, and ensuring proper wiring and grounding. The contactor should be installed according to the manufacturer's instructions and local electrical codes.
Go to product