The Allen-Bradley 150-F201NBR, part of the SMC Flex series, is an advanced Smart Motor Controller designed to accommodate a wide spectrum of start and stop modes, including Soft Start and Current Limit Start, maximizing motor protection and efficiency. Operating at a line voltage of 200-460VAC, 3-phase, and supporting a control voltage of 24V AC/DC, it manages a continuous output current of 201 Amperes, making it suitable for motors up to 150 HP at 460VAC. Engineered for ease of use and adaptability, it features a built-in Human Interface Module for intuitive configuration and operation, a robust power circuit with IEC-rated insulation, and extensive communication options via a DPI port.
Technical specifications for 150-F201NBR
Manufacturer
Rockwell Automation
Bulletin Number
150
Part Number/Catalog No.
150-F201NBR
Control Voltage
24V AC / 24VDC (5…480 A units)
Brand
Allen-Bradley
Product Family:
SMC Flex Smart Motor Controller
Operating Modes:
Soft Start, Full Voltage Start, Smart Motor Braking, Current Limit Start, Dual Ramp Start, Accu-Stop, Selectable Kickstart, Pump Start, Slow Speed with Braking, Coast-to-rest, Preset Slow Speed, Linear Speed Acceleration (Tachometer required), Soft Stop and Pump Stop
Line Voltage:
200…460V AC, 3-Phase, 50 and 60 Hz
Maximum output Current
201 A
Maximum output Power
150 HP
Communications
One DPI provided for connection to optional human interface and one DPI provided for connection to communication
Auxiliary Contacts
Four fully programmable contacts as normal/up-to- speed/fault/alarm/network (N.O./N.C.), or external bypass (N.O. only)
Metering
Amps, volts, kW, kWh, MW, MWH, elapsed time, power factor, motor thermal capacity usage
Protection and Diagnostics
Power loss, line fault, voltage unbalance, excessive starts/hour, phase reversal, undervoltage, overvoltage, controller temp, stall, jam, open gate, overload, underload, communication fault.
