The part number 1492-RCDA4B40 is a Residual Current Device (RCD) from Rockwell Automation, specifically designed for use in industrial settings. It is part of the Allen-Bradley product line and is characterized by its 4-pole configuration, 100mA sensitivity, and A40 rating. This device is designed to provide protection against current leakage to ground (earth) caused by insulation loss between a live conductor and an exposed conductive part.
Technical Specifications
The technical specifications for this device are detailed in the product catalog and include:
- Poles: 4
- Rated Current (In): 40 A
- Sensitivity (I∆n): 100 mA
- Type Code: RCDA (Residual Current Device, Type A)
- Rated Sensitivity: 100 mA
- Code: B (100 mA sensitivity)
Documentation
The documentation for this product includes a selection guide, which is available through the Literature Library results. This guide provides detailed information on the product's features, specifications, and applications.
Alarm/Error Codes
The alarm and error codes for this device are not explicitly mentioned in the provided documentation. However, it is likely that the device will have standard alarm and error codes that are specific to the product and its configuration. These codes are typically used to indicate malfunctions or errors in the device's operation.
User Manuals
The user manual for this device is not explicitly mentioned in the provided documentation. However, it is likely that Rockwell Automation provides user manuals for its products, which would include detailed instructions on installation, operation, and troubleshooting.
Troubleshooting
Troubleshooting for this device would involve identifying and addressing any issues that may arise during its operation. This could include checking for proper installation, ensuring that the device is configured correctly, and verifying that it is functioning within its specified parameters. If issues persist, it may be necessary to consult the user manual or contact Rockwell Automation support for further assistance.
Programming
The programming of this device is not explicitly mentioned in the provided documentation. However, it is likely that the device can be programmed to customize its operation and settings. This could be done using specialized software or tools provided by Rockwell Automation.
Installation
The installation of this device involves connecting it to the electrical system it is designed to protect. This typically involves connecting the device to the live conductors and grounding the device according to the manufacturer's instructions. It is important to ensure that the device is installed correctly and in accordance with local electrical codes and regulations to ensure its effective operation and to prevent any potential safety hazards.
Go to product