The Allen-Bradley 1204-TFA1 is a reflective wave terminator designed for use in motor control systems. It is rated for operation in hazardous locations and is suitable for use in environments with high temperatures and humidity. The terminator is designed to operate with a carrier frequency of up to 6 kHz and is compatible with a range of motor types.
### Technical Specifications
- **Input Power**: 380-600V, Three-Phase
- **Maximum Drive Carrier Frequency**: 6 kHz
- **Type**: Reflective Wave
- **Carrier Frequency Recommended**: 2 kHz
- **Carrier Frequency Maximum**: 6 kHz
- **Power Range**: 0.37-3.7 kW (0.5-5 HP)
- **Ambient Temperature**: 0-40 degrees C (32-104 degrees F)
- **Humidity**: 5-95% non-condensing
- **Atmosphere**: Class 1, Division 2
- **Enclosure Type**: IP65 (NEMA Type 4x)
- **Hazardous Environment Rating**: T3 (200° C); Groups A, B, C, D
- **Agency Certification**: UL, C-UL
- **Altitude Derating**: Full rating up to 1000 meters (3280 feet)
- **Ambient Temperature Limit**: 40 degrees C (104 degrees F)
- **Altitude Limit**: 1000 meters (3280 feet)
### Alarm/Error Codes
No specific alarm or error codes are mentioned in the provided documentation. However, it is recommended to consult the user manual or manufacturer's documentation for detailed information on error handling and troubleshooting.
### User Manuals
The user manual for the Allen-Bradley 1204-TFA1 terminator is available from Rockwell Automation, the manufacturer. The manual provides detailed instructions on installation, operation, and maintenance of the device.
### Troubleshooting
Troubleshooting information for the Allen-Bradley 1204-TFA1 terminator is not explicitly provided in our research. However, it is recommended to consult the user manual or manufacturer's documentation for detailed troubleshooting procedures.
### Programming
The Allen-Bradley 1204-TFA1 terminator is designed for use with Allen-Bradley drives and is programmed through the drive's interface. The drive's programming manual should be consulted for detailed information on programming the terminator.
### Installation
The Allen-Bradley 1204-TFA1 terminator is designed for installation in hazardous locations and should be installed in accordance with the manufacturer's instructions and relevant safety guidelines. The terminator should be installed in a location where it is not exposed to direct sunlight or other sources of heat that could increase its operating temperature. Additionally, the terminator should be installed in a location where it is easily accessible for maintenance and troubleshooting purposes.
Go to product